EN
Buy Now
Contact us for
TECHNICAL DATA
| Power supply | 10..40 Vdc; 19..28 Vac |
| Max. consumption | 3 W |
| Max. isolation | 1,5 kVac |
| Status indicators | Power supply Input / output status STS (IP address / DHCP) RX / TX (Data reception / transmission on RS485) Ethernet TRF / LNK (Packet transit / Ethernet connection) |
| Protection rating | IP20 |
| Operating temperature | -25..+65°C |
| Dimensions (wxhxd) | 106 x 90 x 32 mm |
| Weight | 170 g |
| Enclosure | UL94-V0 self-extinguishing PC/ABS material, black |
| Connections | 3,5 mm pitch terminals and dual RJ45 connector |
| Mounting | On DIN EN 60715 rail, wall / panel mounting |
| Programming | Integrated Web Server, DIP switches |
| Special functions | Dual Daisy Chain Ethernet connection LAN fault bypass (active connection between the device's two Ethernet ports if power is lost) Modbus Passthrough (TCP-IP to RS485) IP, MAC and Firmware identification and configuration using the SDD tool |
| Interfaces | No. 2 Ethernet ports (with LAN fault-bypass function), 100 BaseT on RJ45 - 100 Mbps No. 1 RS485 port on M23-M24-M25 terminals - 115.200 bps |
| Protocols | ModBUS RTU, ModBUS TCP-IP, HTTP |
| Cable for Ethernet communication between devices | Unshielded CAT5 or CAT5e |
| ModBUS communication | Up to 64 nodes without a repeater and max speed of 115 kbps |
| analog INPUTS | |
| Number of Channels | 8 Analogue |
| Type and Range | Voltage: -30 V..+30 V; -150 mV ..+150 mV Current: -24 mA..+24 mA Thermocouple: J, K, T, E, N, R, S, B, L Pt100 RTD on AI1: -200 °C ÷ +650 °C (for cold-junction compensation only) |
| ADC resolution | 24 bit |
| DIGITAL INPUTS/OUTPUTS | |
| Number of Channels | 8 Digital Inputs/Outputs |
| Type and Range | Inputs = voltage: ON threshold: > 11 V; OFF threshold: < 4 V; Vmax: 28 V; Impedance: 9 kΩ Outputs = MOSFET, PNP; max voltage / current: 0,2 A; 9..28 V |
| Counters | 8 channels at 2 ms (250 Hz), 32-bit |
| STANDARD | |
| Certifications | CE |
| Approvals and standards | EN61000-6-4, EN61000-6-2, EN61010-1 |
