Customs origin and Export Control

Preferential origin • Customs tariff codes • Dual Use / ECCN • Sanctions

Long-term supplier’s declaration: SENECA origin, customs tariff codes and export control

EU preferential origin, customs codes updated to the 2027 Combined Nomenclature and export controls: one page covering the rules applicable to exporters of SENECA products, our position and downloadable documents.

Download the 2027 declaration Request a document

Dispositivo SENECA Z-LTE-CEI

EU origin
VALID
Year 2027

Origin • Compliance

SENECA

725

product codes with declared EU preferential origin

30

CN tariff headings checked against the 2027 Combined Nomenclature

79

countries and territories covered by EU preferential trade agreements

12 months

of validity: shipments from 01/01/2027 to 31/12/2027

01 Regulatory framework 02 SENECA approach 03 Declarations 04 Customs tariff codes 05 Requests 06 FAQ

01 Regulatory framework

Rules for exporters of industrial electronic products

Origin, tariff classification and export controls are three separate matters: the first determines whether goods qualify for reduced duties in the destination country; the second determines their customs classification; and the third determines whether and under what conditions they may be exported.

EU • Origin

Supplier’s declaration

Regulation (EU) 2015/2447, Arts. 61–63 • Annex 22-16

  • Through a long-term declaration, the supplier certifies the originating status of goods supplied regularly over a period of up to 24 months. Exporters use it as supporting evidence to obtain an EUR.1 certificate or issue statements on origin.
  • SENECA: annual declaration listing all product codes, tariff headings and countries of origin.

EU • Pan-Euro-Mediterranean area

Revised PEM Convention

Decision No 1/2023 • Regulation (EU) 2025/1728

  • From 1 January 2026, the EU applies only the revised rules under agreements that refer dynamically to the Convention. Supplier’s declarations must specify the legal framework used to determine origin.
  • SENECA: the 2027 declaration identifies the legal framework; no cumulation applied.

EU • Classification

Combined Nomenclature 2027

Regulation (EU) 2026/2163 • from 01/01/2027

  • The new version of Annex I to Regulation (EEC) 2658/87 was published on 30 October 2026. The first six digits of the CN code correspond to the Harmonized System (HS) used worldwide.
  • SENECA: 30 tariff headings checked against the TARIC database as at 01/01/2027; two obsolete headings have been updated.

EU • Trade agreements

New preferential partners

Mercosur • Japan • New Zealand • Kenya

  • The EU–Mercosur interim agreement has applied provisionally since 1 May 2026. Agreements with India, Australia and Indonesia, and the modernised agreement with Mexico, have been concluded or signed but are not yet in force.
  • SENECA: country list updated to reflect agreements in force or provisionally applied.

EU • Export control

Dual-use goods

Regulation (EU) 2021/821 • Annex I • ECCN

  • Exports of goods listed in Annex I, identified by an ECCN (Export Control Classification Number), require authorisation. The list is updated annually: the Commission adopted a new update on 14 September 2026, applicable after its publication in the Official Journal.
  • SENECA: according to the Dual Use Declaration, products are not listed in Annex I (no EU ECCN) and are classified EAR99 under US EAR, except communication and remote-control devices.

EU • Restrictive measures

Sanctions and destinations

Regulation (EU) 833/2014 • Regulation (EC) 765/2006

  • Restrictive measures against Russia and Belarus prohibit exports of many categories of industrial goods and require exporters to check recipients, destinations and end uses, including for re-exports.
  • SENECA: specific declaration under Regulation (EU) 833/2014; the exporter remains responsible for checking each transaction.

Key dates

01/01/2025

Revised PEM rules applicable: transitional year with two sets of rules

31/08/2025

Regulation (EU) 2025/1728 on supplier’s declarations enters into force

01/01/2026

PEM area: revised rules only under agreements with dynamic references

01/05/2026

Provisional application of the EU–Mercosur interim agreement

30/10/2026

2027 Combined Nomenclature published

01/01/2027

2027 CN and the 2027 long-term declaration take effect

02 The SENECA approach

From product code to signed declaration

Most SENECA products are designed and manufactured in Italy. For every catalogue code, we keep three details needed by exporters up to date: customs tariff heading, country of origin and export-control status.

Customs classification

Each product code has an eight-digit CN heading, checked annually against the new Combined Nomenclature and the TARIC database.

Origin of goods

For each code, we indicate its non-preferential country of origin (made in) and, for products originating in the EU, their preferential originating status.

Export controls

We assess products against the dual-use list and EU restrictive measures, updating declarations whenever the rules change.

Customer documents

Annual long-term declaration for all customers; company-specific, shipment-specific or product-specific declarations on request.

Traded products of non-EU or undetermined origin are listed in a separate section of the declaration solely for customs classification purposes: EU preferential origin is not declared for these codes.

03 Declarations

Export declarations

All declarations are signed by SENECA management and apply to products supplied by SENECA S.r.l. They are also available on the Quality and Certifications.

Declaration References Date Document
Long-term supplier’s declaration 2027 Regulation (EU) 2015/2447, Annex 22-16 • valid from 01/01/2027 to 31/12/2027 10/11/2026 PDF
Long-term supplier’s declaration 2026 Regulation (EU) 2015/2447, Annex 22-16 • valid from 01/01/2026 to 31/12/2026 15/12/2025 PDF
Dual Use Declaration Regulation (EU) 2021/821 • dual-use goods • ECCN / EAR99 27/05/2024 PDF
Declaration under Regulation (EU) 833/2014 Restrictive measures • iron and steel products 11/2023 PDF
UKCA Declaration Marking for the UK market — PDF
Conflict Minerals Declaration Regulation (EU) 2017/821 • OECD guidelines 05/08/2025 PDF

Declarations are updated when regulations or product lists change. If in doubt about the applicable version, contact qualita@seneca.it.

Countries covered by the 2027 declaration

Europe and PEM area

Albania, Bosnia and Herzegovina, Georgia, Iceland, Faroe Islands, Kosovo, Liechtenstein, North Macedonia, Moldova, Montenegro, Norway, United Kingdom, Serbia, Switzerland, Ukraine, Ceuta and Melilla.

Mediterranean and Africa

Algeria, Egypt, Jordan, Israel, Lebanon, Morocco, Tunisia, West Bank and Gaza; Cameroon, Côte d’Ivoire, Ghana, Kenya (new), South Africa and other SADC states, ESA states.

Americas

Canada, Mexico, Chile, Colombia, Ecuador, Peru, Central America (Costa Rica, El Salvador, Guatemala, Honduras, Nicaragua, Panama), CARIFORUM, Mercosur: Argentina, Brazil, Paraguay, Uruguay (new).

Asia and Pacific

South Korea, Japan (new), Singapore, Vietnam, New Zealand (new), Fiji, Solomon Islands, Papua New Guinea, Samoa.

04 Customs tariff codes

Customs tariff codes for SENECA product families

2027 Combined Nomenclature headings used for the 785 product codes in the list. The first six digits correspond to the HS code; the heading for each individual item is provided in the annex to the long-term declaration.

To find the customs tariff heading for an item, consult the annex to the long-term declaration or contact qualita@seneca.it.

CN heading 2027 Short description SENECA product families
8543 70 90 Other electrical machines and apparatus with individual functions, not specified elsewhere Current transformers • Multistandard converters – Z Series • Rogowski sensors RC1x0
8517 62 00 Apparatus for reception, conversion and transmission of voice, images or data Remote alarm units • Industrial gateways – Networking • Energy controllers
8531 20 40 Indicator panels with active-matrix liquid crystal devices Digital indicators – S Series • HMI operator panels • Multifunction IIoT HMIs
8538 90 91 Parts of apparatus of headings 8535–8537: electronic assemblies ModBUS RTU I/O modules – Z-PC Series • R Series ModBUS RTU/TCP-IP I/O modules • R Series PROFINET I/O modules
8523 51 10 Unrecorded non-volatile semiconductor storage devices Data recorders • Straton • System software
9025 19 00 Thermometers and pyrometers, not combined with other instruments, other Portable measuring systems • Temperature transmitters and sensors • Remote alarm units
9030 33 70 Instruments for measuring voltage, current, resistance or power, without recording device Power analysers – S604 Series • Power analysers – S711 Series • Power analysers – T203PM Series
8517 18 00 Other subscriber telephone sets Radio modules • R Series ModBUS RTU/TCP-IP I/O modules • Energy controllers
8544 42 90 Electric conductors ≤ 1,000 V fitted with connectors, other Cables
8523 80 90 Other recording media, other Multifunction IIoT HMIs • Straton • Portable calibrators
9026 80 20 Electronic instruments for measuring or checking flow, level and other variables of liquids or gases Batch controllers – S Series • HMI operator panels • Remote alarm units
8529 10 69 Other antennas Optional antennas • Radio modules
9030 39 00 Instruments for measuring electrical quantities, with recording device Power analysers – R203/R204 Series
8504 40 95 Other static converters Vessel monitoring • Remote alarm units • High-isolation interfaces – S Series
9028 30 19 AC electricity meters, polyphase Energy meters – S500 Series
8507 60 00 Lithium-ion accumulators Smart dataloggers • Low-power RTUs • Remote alarm units
8537 10 98 Control or distribution boards and cabinets ≤ 1,000 V, other Automation accessories • Compact converters – K Series
8471 41 00 Automatic data-processing machines with central processing, input and output units Edge/VPN/IIoT connectivity • IEC 61131 multifunction controllers • Energy controllers
9028 30 11 AC electricity meters, single-phase Energy meters – S500 Series
8536 30 30 Electrical circuit protection apparatus, > 16 A and ≤ 125 A Surge protection devices – S400 Series
9025 90 00 Parts and accessories of thermometers and similar instruments Temperature transmitters and sensors
8537 10 91 Programmable-memory controllers IEC 61131 RTUs • High-isolation interfaces – S Series • Process controllers
8504 31 29 Measuring transformers ≤ 1 kVA, other Current transducers – T201 Series
8529 10 65 Internal receiver antennas, including built-in antennas Optional antennas
8538 90 99 Other parts of apparatus of headings 8535–8537 Low-power RTUs • Current transducers – T201 Series
9030 31 00 Multimeters without recording devices Portable calibrators
4202 12 99 Cases and similar containers with an outer surface of plastics or textile materials, other Portable calibrators
8443 39 00 Other printers and similar apparatus Batch controllers – S Series
8536 90 95 Other apparatus for connecting electrical circuits ≤ 1,000 V Remote alarm units
9028 90 10 Parts and accessories of electricity meters Energy meters – S500 Series

Descriptions are unofficial summaries of Combined Nomenclature wording. For software, licences, cloud services and calibration certificates, the heading refers to physical media where supplied; intangible supplies are not goods for customs purposes.

05 Requests

Do you need a document for a shipment?

SENECA Quality Department handles requests from customers, distributors, freight forwarders and purchasing departments.

  • Long-term declaration issued to your company
  • Supplier’s declaration for an individual shipment
  • Customs heading and country of origin for an individual product code
  • ECCN code, dual-use status or end-use declaration for a specific destination

Provide product codes, destination country and order number for a faster response.

Contact the Quality Department

Provide your name, company, product codes and the document you need: origin declaration, customs information or export-control declaration.

qualita@seneca.it

06 FAQ

Frequently asked questions

What is a long-term supplier’s declaration?

It is the document provided for by Article 62 and Annex 22-16 of Regulation (EU) 2015/2447, whereby the supplier certifies that goods supplied over a given period originate in the European Union and meet the rules of origin of the specified preferential agreements.

Why do I need it when exporting SENECA products?

It provides evidence enabling you to declare the EU preferential origin of SENECA products that you resell or incorporate into your systems. On this basis, you may request an EUR.1 certificate or issue a statement on origin if you are an approved exporter or REX-registered exporter, or for low-value consignments within the thresholds set by the applicable agreement.

What is the difference between preferential origin and “made in”?

Non-preferential origin (made in) identifies the country where goods were manufactured or underwent their last substantial transformation. Preferential origin depends on the rules of each trade agreement and may qualify goods for reduced or zero import duties in the partner country. The declaration includes both types of information.

What has changed in the 2027 declaration?

It is drafted in Italian in a more compact format, identifies the legal origin framework as required by Regulation (EU) 2025/1728, includes tariff headings checked against the 2027 Combined Nomenclature and adds Japan, New Zealand, Kenya and Mercosur countries to the partner list.

Why are some products excluded?

Some traded items, such as current transformers, operator panels and temperature probes, have non-EU or undetermined origin. They are listed separately with their tariff heading, but SENECA does not declare EU preferential origin for these codes.

What is the difference between HS, CN and TARIC codes?

The Harmonized System (HS) is the international six-digit classification. The EU Combined Nomenclature (CN) adds two digits and is used for export declarations. The ten-digit TARIC code is used for imports into the EU. SENECA declarations include the eight-digit CN code.

Are SENECA products dual-use goods?

SENECA products are designed as components for industrial and civil systems. Their status under Annex I to Regulation (EU) 2021/821 is specified in the Dual Use Declaration. For communication and remote-control devices and sensitive destinations, request confirmation from the Quality Department, specifying product code and country.

What is the ECCN for SENECA products?

According to SENECA’s Dual Use Declaration, products are not included in Annex I to Regulation (EU) 2021/821 and therefore have no EU ECCN. Under the US Export Administration Regulations they are classified EAR99, except industrial communication and remote-control devices: contact qualita@seneca.it for the ECCN of these items.

Can I obtain a declaration addressed to my company?

Yes. Contact qualita@seneca.it with your company name, product codes and period. The Quality Department will issue a company-specific long-term declaration or an individual shipment declaration.

Information updated November 2026. Signed PDF declarations take precedence over the summaries on this page. Official sources: European Commission – TARIC • Regulation (EU) 2025/1728 • Access2Markets – PEM Convention • Regulation (EU) 2021/821

Declared origin, documented exports

SENECA S.r.l. • Via Austria, 26 • 35127 Padova (I) • Tel. +39 049 87.05.359

qualita@seneca.it Quality and Certifications Environmental compliance

loading results