This device also functions as a web server and data logger, allowing users to access the main parameters and data easily and efficiently. The user can also transfer data via FTP.
Some of its advanced features include:
- Universal Input: Each device can be configured to accept single-phase, three-phase, CT, CT with mV or Rogowski sensor inputs according to requirements.
- MQTT and HTTP POST support: By integrating advanced protocols, it provides immediate access to real-time energy data wherever you are.
- 8 MB data memory: Equipped with enhanced memory for storing data/events, harmonics up to the 55th and THD, ideal for plant analysis and optimisation.
- Maximum Flexibility: also in the choice of power supply and Ethernet ports through which R203 provides ModBUS TCP/IP / ModBUS RTU gateway functions
- Digital I/O Channels: It features 2 digital outputs and 2 independent inputs with 32-bit counters for active, reactive and apparent energy metering.
With our R203-WF Network Analyser, you will have a reliable and versatile instrument for monitoring and managing your electrical network.
TECHNICAL DATA
| Power supply | 10..30 Vdc (R203-1-L, R203-2-L models) 90..264 Vac (50-60 Hz) (R203-1-H, R203-2-H models) |
| Consumption | 2.8 W |
| Isolation | 3,500 Vac (to/from power-supply circuits) 1,500 Vac (other circuits) |
| Status indicators | Power supply, digital channels, RS485 communication, data-logger status, wiring error, Ethernet-port activity |
| Installation category | 600 V CAT III |
| Programming | via web server. The SDD software can be used to locate and easily access the device. |
| Accuracy class | 0.2% for voltage/current; 0.5% for power |
| Flash memory | 8 MB |
| Special Network functions | Dual Daisy Chain Ethernet connection LAN fault bypass (active connection between the device's two Ethernet ports in the event of a power interruption) Max 32 P2P (I/O Mirror) - No Master required ModBUS Passthrough (TCP-IP to RS485) IP, MAC and Firmware identification and configuration using SDD software |
| Special Energy functions | Energy metering (on digital output), No. 2 incremental 32-bit counters on digital inputs @5kHz |
| Connection type / Connection mode | Single-phase, 3-wire three-phase, 4-wire three-phase, CT, CT with mV output, Rogowski transducers, Aron |
| Protection rating | Front IP20 |
| Mounting | 35 mm DIN rail |
| Connections | screw terminals |
| Operating temperature | -25..+65°C |
| Dimensions | 107x90x32 mm |
| Weight | 170 g |
| Enclosure | UL94-V0 self-extinguishing PC/ABS, black |
| Voltage/Current Inputs | |
| Phase-voltage measurement | Voltage: up to 600 Vac, freq. 45 ÷ 65 Hz VT with output up to 600 Vac relative to neutral |
| Phase-current measurement | CT with 1-5 A FS output CT with mV output or Rogowski up to 250 mV |
| INTEGRATED I/O | |
| Digital inputs | No. 2 activated by voltage from 12 to 24V, with 2 digital counters at 50 Hz |
| Digital outputs | No. 2, Imax capacity = 50 mA Vmax = 28V |
| analog outputs | No. 1 configurable for voltage 0..10 Vdc, min load resistance 2kΩ or current 0..20, 4..20 mA, max load resistance 500Ω Transmission error: 0,1% of max range Thermal drift: 100 ppm/K |
| COMMUNICATION | |
| Serial | |
| Interfaces | No. 1 RS485 port |
| Protocols | ModBUS RTU |
| Distance | Up to 1,200 m |
| Connectivity | Max 128 nodes |
| Ethernet | |
| Ports | No. 1 Ethernet 100 Mbps (R203-1-x models) No. 2 Ethernet 100 Mbps (R203-2-x models) WiFi with stand-alone/2.4 GHz bgn access point mode |
| Protocols | ModBUS TCP-IP, MQTT, HTTP POST, P2P, FTP |
| Connections | Ethernet switch with Daisy Chain protection |
Manuals, flyers
Firmwares
DRAWINGS & CAD MODELS
Product Compliance
Accessories
Related Products
Accessories
Rogowski sensor L=180 cm, internal Ø 57 cm, 100mV/1KA-50Hz and cable L=3mt
Rogowski sensor L=30 cm, internal Ø 7 cm, 120 mV/1 kA-60 Hz and cable L=3 m, UL certified
Rogowski sensor L=40 cm, internal Ø 11 cm, 120 mV/1 kA-60 Hz and cable L=3 m, UL certified
Rogowski sensor L=60 cm, internal Ø 17,5 cm, 120 mV/1 kA-60 Hz and cable L=3 m, UL certified
Split-core current transformer 100/5A CL.0,5 D=20x30mm
Split-core current transformer 250/5A CL.0,5 D=20x30mm
Split-core current transformer 400/5A CL.0,5 D=20x30mm
Split-core current transformer 400/5A CL.0,5 D=50x80mm
Split-core current transformer 500/5A CL.0,5 D=50x80mm
Split-core current transformer 600/5A CL.0,5 D=50x80mm
Split-core current transformer 750/5A CL.0,5 D=50x80mm
Split-core current transformer 800/5A CL.0,5 D=80x80mm
Split-core current transformer 1000/5A CL.0,5 D=80x80mm
Busbar-through current transformer 50/5A CL.1, 22mm cable, busbar 30x10mm
Busbar-through current transformer 60/5A CL.1, 22mm cable, busbar 30x10mm
Busbar-through current transformer 100/5A CL.1, 22mm cable, busbar 30x10mm
Busbar-through current transformer 150/5A CL.1, 22mm cable, busbar 30x10mm
Busbar-through current transformer 100/5A CL.0,5, 32mm cable
Busbar-through current transformer 400/5A CL.0,5, 32mm cable

