EN
Images/schemes proposed are to be considered as indicative and non-binding
Product
MSC-D
Multi-signal and multi-function portable smart calibrator with display
MSC-D (Multifunction Smart Calibrator) is a multifunction calibrator designed for the maintenance and testing of sensors and process measuring instruments. With an accuracy better than 0.05% on every type of input and output, it ensures reliable measurements and the generation of analog, digital, temperature sensor, and load cell signals.
Thanks to its advanced connectivity, MSC-D has an intuitive interface and can be operated directly or remotely via the integrated display. It features both an Ethernet port and a built-in Wi-Fi receiver, allowing seamless network integration and easy access to the embedded web server via a browser without requiring additional software. This enables practical and efficient use via the workstation. To ensure secure access, the device can be password-protected.
Its advanced functionalities include automatic ramp generation, both single and looped, as well as a data logging system that allows users to record and export data in .CSV format.
The rechargeable lithium-polymer battery can power external devices or sensors, making it a versatile solution suitable for various professional and industrial applications. With a reading capacity of up to 100,000 measurements, it is ideal for maintenance, technical support, measurement and calibration laboratories, quality control, electromechanical workshops, and PLC programming.
MSC-D equipment:
- Portable shockproof case
- Calibrator complete with internal battery
- Factory calibration report
- Battery charger and USB-A to micro USB cable
- A practical guide to wiring
- 1 Type K thermocouple
- 4 Test and connection cables
Please request a quote now, contact our sales offices, or click here.
Contact us for
Support & Info
TECHNICAL DATA
| Power supply from mains | From 100-240 VAC mains via standard Micro USB battery charger |
| Battery power supply | 1 Lithium Polymer (LiPo) 3400 mAh battery |
| Switching on | By button or automatic (depending on the mains power supply) |
| Autonomy | 4 hours (minimum at maximum load) |
| Degree of protection | IP20 |
| Overvoltage protection | 240 Vac max without permanent damage |
| Operating temperature | -20..50°C (not charging), 0..40°C during charging |
| Long-term storage temperature | 0..35°C |
| Humidity | 30..90 % non-condensing |
| Dimensions (WxHxD) | 96 x 171 x 44 mm |
| Weight | 395 g |
| Rejection | 50/60 Hz |
| Sampling Frequency | 10 Hz |
| Operating Modes | Meter, Generator, Datalogger, Ramps |
| Memory | 16MB Flash, 8 MB RAM |
| Display | 5-point capacitive touch display, TFT-LCD 262k colors, 3.5“, 53x71mm, 320x480 resolution, with backlight. |
| Management systems | Touch display interface and WebServer with integrated multilingual APP (Italian, English, German, French, Spanish) |
| Weight | 395 g |
| Supplied with | (1) Portable case, (2) MSC-D with battery, (3) adapter, (4) USB charging cable, (5) factory calibration report, (6) test cables |
| Calibration report | On request |
| Certification | CE |
| Standards | EN61326-1; EN61010-1 |
| MEASUREMENT ACCURACY | |
| Accuracy | 0.03% basic, 0.04% for current |
| Resolution | 1 µA; 1 mV; 5 µV; 0.1°C; 0.1uV/V |
| GENERATION ACCURACY | |
| Accuracy | 0.03% basic, 0.04% for current |
| Resolution | 1 µA; 1 mV; 5µV; 0.1°C; 0.02 Ohm; 0.1 uV/V; |
| INTERFACES AND SIGNALS | |
| Buttons | On / Off |
| LED | Power on LED Battery charge status LED Datalogger on LED |
| Buzzer | Buzzer to signal overload and when it is impossible to simulate the requested value. |
| Standard bushings | No. 4 4mm bushings |
| Thermocouple connection | Mini plug (7.9mm) for thermocouple measurement and simulation |
| COMMUNICATION | |
| Micro USB | For firmware updates |
| Wireless | Integrated 2.4 GHz WiFi (802.11 b/g/n, up to 150 Mbps); Access Point/Station mode |
| Ethernet | 1 Fast Ethernet 100 Tx port, Modbus TCP-IP protocol; max 8 TCP-IP clients, control web server |
| MEASURING FUNCTIONS | |
| Current | 0.1..24 mA active and passive; protection ± 28 V |
| Voltage (V) | 0..26 V |
| Voltage (mV) | -10mV..+90mV |
| Thermocouple | Type J,K ,T, E, N, R, S, B, L |
| Thermocouples (2,3,4 wires) | Pt100, Pt500, Pt1000, Cu50, Cu100, Ni100, Ni120 |
| Load cell | 350 Ohm; -0.2..+3mV/V |
| Pulse | Max. count 1000 Hz |
| Frequency | 0.1..1000 Hz |
| GENERATION FUNCTIONS | |
| Current | 0.1..24 mA active and passive; protection ± 28 V |
| Voltage (V) | 0.1..26 V |
| Voltage (mV) | -10mV..+90mV |
| Thermocouple | Type J,K ,T, E, N, R,S, B, L |
| Thermoresistances (2 wires) | Pt100, Pt500, Pt1000, Cu50, Cu100, Ni100, Ni120 |
| Load cell | 350 Ohm; -0.2..+3mV/V |
| Pulse | Min 0.5 ms (1..24V) number of pulses can be set |
| Frequency | 0.1..1000 Hz; resolution 50µs |
| DATA LOGGER | |
| Data logger | Yes |
| Sampling time | >500 ms |
| RAMP FUNCTION | |
| Signal | Current/Voltage/TC/RTD/Load cell |
| Functions | Single or Loop |
| Type | Maximum 9 segments, ramp resolution 100ms, minimum ramp 1 second |
| SETTINGS AND SIGNALS | |
| Functions menu | General setup (select type of operation, type of signal, language, mains frequency 50/60Hz, std or expert mode) Measurement (select voltage / current / passive current / thermocouples / resistance thermometers / bridge / pulses) Datalogger (start/stop/pause) and data visualization Generation (selection of voltage / current / passive current / thermocouples / thermoresistances / bridge / pulses) Generation of signals in ramp mode or with presets (10 for each mode) |
| Error messages | Overvoltage Voltage reading higher than 28 V Under voltage Voltage reading lower than -0.2 V Over-current Current reading higher than 24 mA Under current reading lower than -0.1 mA Resistance lower than 18 Ohm Resistance higher than 400 Ohm The load cell is not powered correctly Value flashing Voltage/current/resistance/bridge generation unsuccessful |
