EN
Contact us for
TECHNICAL DATA
| Power supply | 10..40 Vdc; 19..28 Vac |
| Power consumption | Max 2 W |
| LED status indicators | Power supply RS232/RS485 port Rx/Tx RS485 port Rx/Tx Ethernet transmission / connection EtherNet/IP communication |
| Isolation | 1,5 kVac (4-way) |
| Protection rating | IP20 |
| Operating temperature | -25..+65°C |
| Connections | 3-way removable screw terminals, 5 mm pitch Rear IDC10 connector for DIN 46277 rail 2x front RJ45 connector |
| Ethernet ports | No.2 Fast Ethernet 100 Tx ports, front RJ45 |
| Serial ports | No.1 switchable RS232 / RS485 port, max baud rate 115k on connector No.1 RS485 port, max baud rate 115k on IDC10 connector for bus and terminals |
| Supported protocols | ModBUS RTU, ModBUS TCP-IP, ModBUS ASCII |
| Operating modes | ModBUS RTU/TCP-IP/ASCII -> Ethernet/IP Gateway |
| Memory dedicated to commands | 512 Bytes for READING and 512 Bytes for WRITING |
| Max TCP-IP clients (Server Mode) | 3 |
| Max ModBUS RTU/ASCII slave nodes | 128 |
| Dimensions (wxhxd) | 17,5 x 100 x 112 mm |
| Weight | 100 g |
| Enclosure | Nylon 6 with 30% glass fibre, V0 self-extinguishing class |
| Installation | For DIN rail (IEC EN 60715) |
| Certifications | CE, UKCA |
| CONFIGURATION | |
| DIP Switch | Flash memory, IP address, serial port activation |
| Web Server | EtherNet/IP parameters, ModBUS registers, firmware update, serial traffic, I/O mapping, EDS export |
| Configuration file | EDS |
| SDD (Seneca Discovery Device) | x |
Manuals, flyers
Firmwares
DRAWINGS & CAD MODELS
Product Compliance
Accessories
Mandatory accessory if 2 communication ports are required.
Alternative products
√ Product added to your basket
| ‹ Add other products |
| Proceed to Checkout › |
Mandatory accessory if 2 communication ports are required.
Z-PC-DINAL2-17.5
DIN rail bus system head terminal + 2 slots 17.5 mm
Availability to confirm, please contact us ?
