Tecnologia FLEX

Un hardware • Più protocolli • Infinite possibilità

FLEX Technology One hardware platform • Multiple protocols • Unlimited possibilities

One device,

all the protocols you need FLEX is SENECA's proprietary multiprotocol technology: the same gateway, power analyzer or I/O module can switch from ModBUS to PROFINET, EtherNet/IP, OPC UA, IEC 61850 or MQTT without changing the hardware, wiring or ordering code.

FLEX multiprotocol configuration

SENECA KEY Series gateway with FLEX technologyHow to change protocol

SENECA R203 power analyzer with FLEX technologyFLEX products

SENECA ZE I/O module with FLEX technologyModuli I/O

Power analyzers

I/O modules

6

famiglie di protocolli industriali sullo stesso hardware

30 s

industrial protocol families on the same hardware

3

to select a new protocol combination

0

product families: gateways, power analyzers and I/O modules

01 programming software required and no changes to I/O tags or registers 02 Vantaggi Technology Protocolli Benefits Prodotti Protocols Procedura Products FAQ

01 Procedure

La connettività industriale diventa flessibile

Con FLEX un unico dispositivo gestisce i protocolli delle reti seriali ed Ethernet industriali e semplifica la comunicazione tra PLC, dispositivi Master/Slave e Client/Server. Cambia il layout produttivo o il protocollo dell’impianto? Si riconfigura il dispositivo, non si sostituisce.

Senza FLEX

  • The technology
  • Industrial connectivity becomes flexible
  • With FLEX, a single device handles serial and industrial Ethernet network protocols and simplifies communication between PLCs, Master/Slave and Client/Server devices. If the production layout or plant protocol changes, simply reconfigure the device instead of replacing it.

Without FLEX

  • A different model for every field or PLC protocol
  • Multiple ordering codes, inventories and spare parts to manage
  • Changing protocols means a new device, a new order and new lead times

With FLEX

One hardware platform for multiple protocol combinations

One stock item, multiple possible configurations

Change protocols in the field while keeping the same wiring and I/O point map

Where it makes a difference

Machine builders

The same machine ships with PROFINET for one customer and EtherNet/IP for another: only the configuration changes, not the bill of materials.

02 Retrofitting

When a plant adopts a new PLC or fieldbus, installed devices can be reconfigured without rewiring the control cabinet.

Spare parts and inventory

Fewer part numbers to keep in stock: one device supports multiple protocols and reduces storage and handling costs.

Massima connettività

Why FLEX

Benefits at a glance

Multiprotocol

Serial and industrial Ethernet networks managed by the same hardware.

No programming

No programming software and no changes to I/O tags or registers.

Instant selection

Select the protocol combination using the free SENECA Discovery Device tool.

Several gateways in one

The functions of multiple gateways for the price of one.

Fewer part numbers

Technology Simpler ordering codes, quotations and purchase orders.

Less inventory

Lower storage and handling costs.

ModBUS / Serial Device Server e ModBUS TCP-IP

Ready to evolve

New protocols and product categories can be added over time.

ModBUS e PROFINET IO

PROFINET IO

Interoperability

ModBUS e EtherNet/IP

Supported protocols

On the field side, FLEX devices communicate via ModBUS RTU, ASCII and TCP-IP; on the PLC, SCADA or cloud side, you select the plant's protocol.

ModBUS e OPC UA

OPC UA

ModBUS ↔ OPC UA

ModBUS e IEC 61850

IEC 61850

ModBUS ↔ IEC 61850

ModBUS e MQTT(s) o HTTP(s)

MQTT(s) / HTTP(s)

ModBUS ↔ MQTT(s) o HTTP(s), verso cloud e broker

Il protocollo è scritto nel codice

Il suffisso del codice prodotto indica la configurazione attiva. Con FLEX lo stesso dispositivo può passare da un suffisso all’altro.

-0 / baseModBUS

-PPROFINET IO

ModBUS ↔ MQTT(s) or HTTP(s), to cloud and brokersSupported protocols

The protocol is in the product codeOPC UA

The product code suffix identifies the active configuration. With FLEX, the same device can switch from one suffix to another.IEC 61850

-CMQTT cloud

Benefits FLEX is SENECA's proprietary multiprotocol technology: the same gateway, power analyzer or I/O module can switch from ModBUS to PROFINET, EtherNet/IP, OPC UA, IEC 61850 or MQTT without changing the hardware, wiring or ordering code.

Dove trovi la tecnologia FLEX

I dispositivi compatibili si riconoscono dal distintivo FLEX nella scheda prodotto. La conversione richiede la revisione hardware indicata e il firmware più recente.

Famiglia Modelli di partenza Protocolli disponibili Revisione HW
Gateway Serie KEY
Where to find FLEX technology
Compatible devices feature the FLEX badge on their product pages. Conversion requires the specified hardware revision and the latest firmware. Family Base models
Available protocols
HW revision
KEY Series gateways
protocol converters
R-KEY-LT, Z-KEY-0, Z-KEY-2ETH and versions -P, -E, -U, -I, -C ModBUS RTU / TCP-IP, PROFINET IO, EtherNet/IP, OPC UA, IEC 61850 ≥ D
Moduli I/O Serie R
I/O remoti
R203 power analyzers ModBUS RTU / TCP-IP, PROFINET IO, EtherNet/IP R203-2-L (24 Vdc), R203-2-H (90..264 Vac) and versions -P, -E, -U, -I
Moduli I/O Serie ZE
formato Z-PC 17,5 mm
R Series I/O modules ModBUS RTU / TCP-IP, PROFINET IO, EtherNet/IP R203-2-L (24 Vdc), R203-2-H (90..264 Vac) and versions -P, -E, -U, -I

remote I/O

R-16DI-8DO, R-32DIDO-2, R-8AI-8DIDO-2, R-4AO-8DIDO-2, R-4RTD-8DIDO-2, R-SG3 and versions -P, -E

Serie KEY: ModBUS, PROFINET, EtherNet/IP, OPC UA, IEC 61850 e MQTT.

How to change protocol

depending on model (see manual)

ZE Series I/O modules

FLEX products

Protocols Available combinations and minimum hardware revisions for each model are listed in the instruction manual. The MQTT code (-C) is available for KEY gateways.

all the protocols you need

Gateways and converters

KEY Series: ModBUS, PROFINET, EtherNet/IP, OPC UA, IEC 61850 and MQTT.

R and ZE Series: digital, analog, temperature and load-cell modules.

I/O systems

4. Reset

Easy to configure

1. Connect

Connect the PC to the FLEX device via Ethernet.

2. Scan

Launch SENECA Discovery Device and scan the ModBUS / Ethernet network.

3. Select

FLEX reconfiguration example from Z-KEY-0 to Z-KEY-P

Select the new protocol combination in approximately 30 seconds.

Products FAQ

4. Reset

With the module powered off, set the DIP switches to "Factory reset".

5. Restart

Power on the device and set the DIP switches to "Read configuration from Flash".

Alternatively, the firmware for the new configuration can be uploaded through the device's web server. After switching, update the PLC and network configuration for the new protocol. Before proceeding, check the latest firmware and instruction manual on the website.

Example: from ModBUS gateway to PROFINET gateway

A Z-KEY-0 used as a ModBUS gateway becomes a Z-KEY-P PROFINET IO gateway using the procedure above: same device, same connections, new protocol to the PLC.

Download SENECA Discovery Device

Serve una revisione hardware minima, indicata in etichetta: ad esempio C per R-KEY-LT, F per Z-KEY, B per Z-KEY-2ETH e D per gli analizzatori R203. In caso di dubbio scrivi a SENECA indicando codice e numero di serie.

Frequently asked questions

What is FLEX technology?

It is SENECA's proprietary technology that enables a single device to support multiple serial and industrial Ethernet communication protocols. You can change the protocol combination through software without replacing the hardware.

Do I need to change wiring, tags or registers?

No. Terminals, field wiring and the I/O point map remain unchanged, and no programming software is required. However, the PLC and network configuration must be adapted to the selected protocol.

Which products feature FLEX?

KEY Series gateways and protocol converters, R203 power analyzers and R and ZE Series I/O modules. Compatible devices display the FLEX badge on their product pages, and new categories will be added over time.

Is my device compatible? How to change protocol A minimum hardware revision, shown on the label, is required: for example C for R-KEY-LT, F for Z-KEY, B for Z-KEY-2ETH and D for R203 analyzers. If in doubt, contact SENECA with the product code and serial number.

loading results