| |
MyALARM2 CEI |
MyALARM2 CEI 4G |
Z-LTE-CEI (NEW) |
| Base power supply |
5..15 Vdc @ 500 mA |
5..15 Vdc @ 500 mA |
24 Vac/dc or 230V |
| Auxiliary power supply |
24 V via DC/DC converter |
24 V via DC/DC converter |
24 V via DC/DC converter |
| Max power consumption |
3.5 W (max) |
3.5 W (max) |
3.5 W (max) |
| Isolation |
- |
- |
1.5 kVac @ 3 ways |
| Rechargeable battery |
Lithium polymer 3.7 V - 1000 mAh, rechargeable, autonomy up to 8 hours (without auxiliary relay) |
Lithium polymer 3.7 V - 1000 mAh, rechargeable, autonomy up to 8 hours (without auxiliary relay) |
Integrated UPS with rechargeable NiMH battery 3.6 V – 0.8 Ah, autonomy up to approx. 60 minutes |
| Shipping mode |
Activation via external power supply; initial charge 48–72h |
Activation via external power supply; initial charge 48–72h |
Activation via external power supply; initial charge 48–72h |
| Status indicators |
Power supply GSM/GPRS coverage Device status |
Power supply 4G/LTE coverage Device status |
Power supply 4G/LTE coverage Device status |
| Display |
LCD 128 x 32 dots |
LCD 128 x 32 dots |
- |
| SIM slot |
Push-push for mini SIM (15 x 25 mm) |
Push-push for mini SIM (15 x 25 mm) |
Push-push for mini SIM (15 x 25 mm) |
| Supported SIM |
Mini SIM |
Mini SIM |
Mini SIM |
| SD support |
MicroSD push-pull slot, HC card support up to 32 GB |
MicroSD push-pull slot, HC card support up to 32 GB |
MicroSD push-pull slot, HC card support up to 32 GB |
| Micro SD |
Included |
Included |
- |
| Memory |
- |
- |
Flash 8MB |
| Datalogger |
Event datalogger on microSD |
Event datalogger on microSD |
Event datalogger on flash memory |
| Protection degree |
IP20 |
IP20 |
IP20 |
| Internal temperature probe |
No.1 NTC thermistor |
No.1 NTC thermistor |
- |
| Antenna |
No.1 standard GSM antenna or external A-GSM (check model) |
No.1 standard GSM antenna or external A-GSM (check model) |
No.1 standard GSM antenna or external A-GSM (check model) |
| Connections |
Removable spring terminals, 3.5 mm pitch SMA connector for GSM antenna |
Removable spring terminals, 3.5 mm pitch SMA connector for GSM antenna |
3-way screw terminals (5 mm pitch for cables up to 2.5 mm²) SMA connector for GSM antenna |
| Operating temperature |
-10..+55°C |
-10..+55°C |
-25..+50°C |
| Storage temperature |
-20..+85°C |
-20..+85°C |
-30..+65°C |
| Humidity |
30..90% @40°C non-condensing |
30..90% @40°C non-condensing |
30..90 % RH non-condensing |
| Dimensions |
80 x 105 x 30 mm |
80 x 105 x 30 mm |
35 x 100 x 112 mm |
| Weight |
150 g |
150 g |
280 g |
| Installation |
DIN rail or wall mounting |
DIN rail or wall mounting |
DIN rail |
| Standard enclosure |
Grey ABS polycarbonate |
Grey ABS polycarbonate |
Black PBT |
| Additional IP66 enclosure |
MY2KIT-IP66 |
MY2KIT-IP66 |
- |
| Certifications |
CE, UKCA |
CE, UKCA |
CE, UKCA |
| Standard compliance |
ETSI EN 301 489-7, EN 301489-1, EN 301489-7, EN 301511, IEC/EN 60950, RED DA |
ETSI EN 301 489-7, EN 301489-1, EN 301489-7, EN 301511, IEC/EN 60950, RED DA |
ETSI EN 301 489-7, EN 301489-1, EN 301489-7, EN 301511, IEC/EN 60950, RED DA |
| Load shedding standards |
CEI 0-16 (Annex M), Resolution 421 (AEEG), Annex A72 (TERNA) |
CEI 0-16 (Annex M), Resolution 421 (AEEG), Annex A72 (TERNA) |
CEI 0-16 (Annex M), Resolution 421 (AEEG), Annex A72 (TERNA) |