Z-PASS2-S Energy

заменяется Z-PASS2-RT-S Energy

IEC 61131 Controller, Straton IDE, 4G router, built-in I/O channels, with Energy protocols

Z-PASS2-S-E-4GWW is an IEC 61131 Advanced Control Unit that natively supports the SENECA LET'S (Remote control and remote assistance platform for Industry 4.0). This powerful CPU provides maximum reliability and security for data management and monitoring by combining PLC (IDE Straton) functionality with routing and remote access capabilities, supporting Point-To-Point connections for remote assistance or Single LAN connections for remote control (for more information www.seneca.it/lets).

Z-PASS2-S-E-4GWW further improves CPU performance by integrating 6 I/O channels (1DI for remote connection security interlock, 1DO for the ongoing VPN connection signaling, and 4 other configurable digital channels), a GPS receiver, and a pentaband 4G modem with Worldwide coverage.
Z-PASS2-S-E-4GWW is equipped with 2 Ethernet ports configurable in SWITCH or LAN/WAN operating mode, 3 serial ports, and 1 USB port. This CPU supports Modbus TCP server, Modbus RTU master/slave, FTP/SFTP server, HTTP/HTPPS server protocols, OpenVPN encryption, and optional protocols for Energy Management applications such as IEC 60870-101, IEC 60870-104 and IEC 61850. The device integrates an ARM9 32-bit, 1Gb Flash, 64MB RAM CPU, and a memory expansion slot with microSD. Configuration is done via the Z-NET4 environment and the web server.

TECHNICAL DATA

Description:	IEC 61131 Controller, Straton IDE, VPN router with integrated I/O, GPS system and 3G+ modem
Power supply:	11..40 Vdc; 19..28 Vac
Power Consumption:	Typical 4 W @ 24Vac, Max 6 W
Insulation:	1.500 Vac
Status indicators:	Increasing/Ready to use Input/output status Remote Connection (RCD) VPN Connection (VPN) LAN/WAN (Ethernet LAN/WAN mode) SERV (VPN BOX Service) Rx-Tx Communications
Operating modes:	Bridge Gateway Router ETH/4G (redundant connection) Remote Virtual COM Tunnel P2P/P2MP/TCP/UDP VPN
Modem	LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28 LTE-TDD: B38/B39/B40/B41 WCDMA: B1/B2/B4/B5/B6/B8/B19 GSM: B2/B3/B5/B (for more information please see user manual) Modem certifications: Deutsche Telekom (Europe) Verizon/AT&T/T-Mobile/Sprint (North America)
I/O channels	nr. 1 DI for VPN Connection Enabled nr. 1 DI for general use nr. 1 DO for VPN connection in progress nr. 1 DO for general use nr. 2 DI/DO configurable
Ethernet ports:	nr. 2 10/100Tx on RJ45 front panel
Serial ports:	nr. 1 RS232/485 switchable via webserver, baud rate max 115k on the connector nr. 1 RS485, baud rate max. 115k on IDC10 connector for bus and terminals nr. 1 RS485, baud rate max. 115k on terminals
Supported protocols:	FTP server, SFTP server HTTP server, HTTPS server SMTP / SMTPS client SNMP SAMBA (MS Windows) SIEMENS S7 Client MQTT Client OPC-UA Server / Client Modbus RTU Master/Slave Modbus TCP Server/Client M-BUS master (via optional module Z-MBUS) IEC 60870-101 Slave (opt.) IEC 60870-104 Master / Slave (opt.) IEC 61850 Client / Server (opt.)
VPN support	VPN Box OpenVPN
GPS receiver:	3G+ modem version GNSS: GPS/GLONASS up to 30 channels 4G/LTE Europe version GNSS: GPS/GLONASS/BeiDou/Galileo/QZSS up to 55 channels
USB port:	nr. 1 USB host 2.0 type A on side connector
Operating temperature:	-20°C..+65°C
Dimension WxHxD:	52,5x100x112 mm