TECHNICAL DATA
Power supply | 10..40 Vdc, 19..28 Vac (@50..60 Hz) |
Power consumption | 2,5 W |
Insulation | 1.500 Vac a 3 vie |
Accuracy class | 0,01% |
Status LED | Power supply Error Tx Data Rx Data |
Input channels | 1 analog channel for reading (and power supply) up to 4 (350 Ω) or 8 (1,000 Ω) strain gauge load cells, 4 or 6-wire connection, equivalent impedance 87 Ω 1DI tare calibration or weight threshold |
Output channels | 1 analog retransmission channel of the net weight in current (0...20, 4...20 mA) or in voltage (0..5, 0..10 V); 1DO tare calibration or weight threshold |
Advanced features | Tare acquisition Stable weighing signaling via Modbus Tara Silos function Counting function Tare reset function Datalogging on EASY Setup |
Advanced settings | Analog output with programmable limits Upgradeable firmware I/O independent digital Wide-range settable sampling rate Alarm threshold with programmable hysteresis Fully configurable analog output Configurable resolution Settable floating-point order |
Measurements | ADC 24 bit Ratiometric measurement Floating-point integer value The minimum net weight value Stabilized measurement with noise filter |
Measurement / Diagnostics | Sensitivity from 1 to 64 mV/V |
Thermal drift | 25 ppm/K |
Interfaces | RS485 2 wires speed up to 115.200 bps |
Supported protocols | ModBUS RTU slave |
Data | EEPROM for configuration parameters, retention time 40 years |
Connections | Removable screw terminals for conductors up to 2.5 mm² MicroUSB port on the front panel |
Programming | Plug&Play configurator (EASY SETUP) |
Protection degree | IP20 |
Mounting | For DIN rail guide 35 mm DIN 46277 |
Operating temperature | -10..+65°C |
Dimension (WxHxD) | 17,5x100x112 mm |
Weight | about 140 g |
Housing | Nylon 6 preloaded 30% glass fiber, self-extinguishing class V0 |
Standards | CE |
Norms | EN 61000-6-4/2002, EN 61000-6-2/2002, EN 61010, EN 60742, IEC 61131 |
SHIPPING AND EXPORT INFORMATION
PRODUCT CODE | Z-SG2 |
GROSS WEIGHT kg | 0.18 |
ORIGIN | IT |
CN (Combined Nomenclature) | 85389091 |
ECCN | 5A991 |
Manuels, prospectus
Tools
DESIGNS & CAD MODÈLES
Certifications
Accessoires
Accessoire obligatoire si vous avez besoin d'une communication ModBUS
Produits alternatifs
Versions du produit
Accessoire obligatoire si vous avez besoin d'une communication ModBUS
Accessoires
USB cable plug USB-A - MicroUSB-B - 5P ( KIT - USB , MY2 , Z109REGBP )
Disponible en quantité limitée ?Equalization and connection circuit up to 4 load cell in parallel + IP66 box including mm diamter cable glands 7 and 2 hole covers
Disponibilité à confirmer, nous contacter ?