Strain gauge converter module with front communication jack port
Z-SG is a load cell converter (strain gauge). The measurement carried out with the 4 or 6-wire technique, is available via ModBUS RTU serial protocol or via the analog output. The communication is configurable via DIP-switch or via software. Z-SG is equipped with protection against ESDfcharge up to 4 kV. The sampling frequency can be set from 12.53Hz to 151.71Hz, while the sensitivity from 1 to 64 mV/V can be set via DIP-switch for integer values, via software for real/integer values. The strain gauge can be directly powered by the instrument. Z-PC-DINAL2-17.5, Z-PC-DIN2-17.5, and Z-PC-DIN8-17.5 are mandatory accessories for ModBUS configurations.
Removable screw terminals for conductors up to 2.5 mm² front communication jack
Interfaces
RS485 2 wires, speed up to 115.200 bps
Supported protocols
ModBUS RTU slave
Input channels
1 analog channel for reading (and power supply) up to 4 (350 Ω) or 8 (1,000 Ω) strain gauge load cells, 4 or 6-wire connection, equivalent impedance 87 Ω 1DI tare calibration or weight threshold
Output channels
1 analog retransmission channel of the net weight in current (0...20, 4...20 mA) or in voltage (0..5, 0..10 V); 1DO tare calibration or weight threshold
Measurement / Diagnostics
Sensitivity from 1 to 64 mV/V
Resolution
24 bit
Thermal drift
25 ppm/K
Data
EEPROM for configuration parameters, retention time 40 years
Programming
Plug&Play configurator (EASY SETUP) System software (Z-NET4) DIP-switch
Protection degree
IP20
Mounting
For DIN rail guide 35 mm DIN 46277
Operating temperature
-10..+65°C
Dimension (WxHxD)
17,5x100x112 mm
Weight
about 140 g
Housing
Nylon 6 preloaded 30% glass fiber, self-extinguishing class V0
Standards
CE
Norms
EN 61000-6-4/2002, EN 61000-6-2/2002, EN 61010, EN 60742, IEC 61131
ADVERTENCIA! Si desea utilizar la comunicación ModBUS, deberá adquirir un accesorio de alimentación obligatorio para carril DIN. Añádelo a tu carrito antes de hacer el pedido. Gracias
Aaccesorios
precio unitario | Cantidad
precio de lista
% des.
Ecommerce
SG-EQ4
Equalization and connection circuit up to 4 load cell in parallel
ADVERTENCIA! Si desea utilizar la comunicación ModBUS, deberá adquirir un accesorio de alimentación obligatorio para carril DIN. Añádelo a tu carrito antes de hacer el pedido. Gracias
Aaccesorios
SG-EQ4
Equalization and connection circuit up to 4 load cell in parallel