Images/schemes proposed are to be considered as indicative and non-binding

Z-AIR-1

Z-AIR-1, Z-AIR-1-10M

Radiomodem 868 - 870 MHz with RS485 and built-in antenna. Complies with Directive 2014/53/UE (RED)

Z-AIR-1 is an IP65 radiomodem with RS485 serial interface and built-in antenna suitable for outdoor applications. The module operates on a 868 - 870 MHz UHF band with 25 kHz or 50 kHz channelled sub-bands. Z-AIR-1 in free use does not require communication of use/frequency employment in accordance with recommendation ERC70-3. The integration of the radiomodem with the antenna considerably improves system efficiency by eliminating the connection losses that are penalizing on high frequencies. Unlike its predecessor (Z-AIR), this variant conforms to Directive 2014/453/EU RED and offers multiple operating modes: point-to-point, point-to-multipoint, broadcasting and ModBUS in the master/slave or multimaster modes, programmable via software. These modes make the Z-AIR-1 a flexible product suitable for a wide range of industrial applications.

NOTE: Z-AIR-1 is not compatible with industrial radio networks configured with the previous generation of radiomodems (Z-AIR). For more information and details, please contact SENECA Service Support.

TECHNICAL DATA

Code:	Z-AIR-1
Description:	868 - 870 MHZ radio modem with integrated antenna
Supply voltage:	9 – 32 Vdc
Operating band:	868 – 870 MHz
Coverage:	Depending on path attenuation and antenna gain, up to several kilometres
Data rate:	9,600 bps (@ 25 kHz channel spacing); 19,200 bps (@ 50 kHz channel spacing)
Operating modes:	Point-to-point, Point-to-multipoint, broadcasting, digirepeater; routing-table support for addressing
Communication via RS485	The serial port is factory-set to 9,600 (baud rate) 8N1, point-to-point and point-to-multipoint configuration. If the instrument must be programmed with a different operating mode/baud rate/protocol, an RS485/USB converter is required (see Accessories TAB). If the product is required configured in 8N2 mode, please specify this in the order notes.
Antenna type:	Integrated λ/2
Modulation:	9K00F1D (@ 25 kHz channel spacing); 18K00F1D (@ 50 kHz channel spacing)
Operating temp.:	-30..+60 °C
Dimensions:	Ø 40 x L 320 mm
Protection rating:	IP65
Receiver:	CLASSE 2 - LBT e AGILITY
Interface:	RS485; data rate 1,200 - 57,600 bps; Half/Full Duplex communication mode
Compliance:	CE