R-KEY-LT EtherNet/IP (HW rev. D0/D1) (HW rev. D0)

заменяется R-KEY-LT EtherNet/IP (HW rev. E0)

EtherNet/IP -> ModBUS RTU/ASCII/TCP-IP protocol gateway/converter with 1 serial port

SENECA offers three Ethernet/IP gateway variants that differ in form factor and number of Ethernet ports. The R-KEY-LT Ethernet/IP model is designed to simplify network communications between Modbus RTU/ASCII/TCP devices and EtherNet/IP networks. The primary function of this gateway is to operate as a Modbus master to acquire and exchange data with EtherNet/IP devices. Specifically, R-KEY-LT converts Modbus data into EtherNet/IP packets, allowing an EtherNet/IP scanner to control or monitor Modbus devices. In detail, the Ethernet/IP gateway operates as a ModBUS Master device on the serial side and as an Ethernet/IP adapter on the Ethernet side. Modbus requests, such as read or write commands, are configured directly on the devices, automatically generating an EDS file. Once this file is imported into the PLC development software, for example Rockwell STUDIO 5000, all configured I/O will be accessible without further configuration. In addition, up to 3 Modbus TCP-IP servers can be connected alongside the serial devices.

TECHNICAL DATA

Power supply	10..40 Vdc; 19..28 Vac
Power consumption	Max 1 W
LED status indicators	Power supply Rx / Tx RS232 / RS485 Powered / assigned IP Ethernet transmission / connection EtherNet/IP communication
Isolation	1,5 kVac
Protection rating	IP20
Operating temperature	-25..+65°C
Connections	Screw terminals, removable 7-way screw terminals, 5 mm pitch Screw terminals, removable 2-way screw terminals, 5 mm pitch RJ45 connector
Ethernet ports	No.1 Fast Ethernet 100 Tx port, RJ45
Serial ports	No.1 switchable RS232 / RS485 port, max baud rate 115k on connector
Supported protocols	ModBUS RTU, ModBUS TCP-IP, ModBUS ASCII
Operating modes	ModBUS RTU/TCP-IP/ASCII -> Ethernet/IP Gateway
Dedicated command memory	512 Bytes for READING and 512 Bytes for WRITING
Max TCP-IP clients (Server Mode)	3
Max ModBUS RTU/ASCII slave nodes	128
Dimensions (wxhxd)	53 x 90 x 32 mm
Weight	80 g
Enclosure	UL94-V0 self-extinguishing PC/ABS
Installation	For DIN rail (IEC EN 60715)
Certifications	CE, UKCA, UL
CONFIGURATION
DIP Switch	Flash memory, IP address, serial port activation
Web Server	EtherNet/IP parameters, ModBUS registers, firmware update, serial traffic, I/O mapping, EDS export
Configuration file	EDS
SDD (Seneca Discovery Device)	x