Z-UMTS

заменяется Z-LTE

3G+ Datalogger with GPS, built-in and expandable I/Os, logic functions, remote control and alarm management

Z-UMTS is the new top-of-the-range SENECA datalogger that allows answering the growing requirements of data acquisition, analysis in real time and integration with IT systems existing in automation and system/process monitoring. In line with the new productivity and communication models of Industry 4.0 and Internet of Things, it is characterized by a 3G+ (GSM/GPRS/UMTS/HSPA+) high-performance modem, 4 integrated communication ports (1 Ethernet 10/100, 1 RS232/RS485, 1 RS485, 1 MicroUSB), 8 integrated I/O channels (4DI/meters/totalizers, 2AI, 2DO), voice alarms/audio controls with DTMF tones and the support of Ftp, Smtp, Smtps, http rest, https, ModBUS RTU, ModBUS TCP-IP and SMS communication protocols.

Configurable as Master unit of the SENECA Z-PC series I/O distributed system, Z-UMTS offers maximum opening towards the outside and third parties (PLC, HMI) thanks to the technology standards it complies with. This unit supports different types of SIM cards and has an 8MB Flash memory, a slot for microSD expandable up to 32GB and multi-tasking real-time operating system. Like all SENECA advanced dataloggers, Z-UMTS is fitted also with a built-in UPS that allows an operating autonomy of up to 1 hour in case of lack of primary power supply. This unit guarantees open and flexible programming, thanks to a dedicated environment for the development of control logics (SeAL), an integrated Web Server, a mobile app (iOS/Android) for the direct management of controls via SMS and a data import/display tool (Log Factory).

Z-UMTS, Z-GPRS3 e Z-LOGGER3 can be integrated with Scada, Cloud, databases and third party’s web portals already available in the systems or at the final users. The combined use of these dataloggers with the Cloud-IoT solution proposed by SENECA (Cloud BOX) completes the possibility of data management through responsive webpages with customisable dashboards and widgets.

TECHNICAL DATA

Power supply	19..40 Vdc 19..28 Vac
Power consumption	2 W (standby) 6,5 W (max)
Insulation	1500 Vac
Protection degree	IP20
LED status	Ethernet I/O Communication (RX/TX) GSM Power supply
Operating temperature	-10..+50°C
Dimensions (LxHxP)	35x100x112 mm
Digital inputs	N° 4 channels PNP, NPN (counters @32bit up to 30 Hz), 30 Vdc max input voltage
Analog inputs	N° 2 channels, range 0..20 mA, 0..30 V, 16 bit
Digital outputs	N° 2 relays output SPDT max 2 A 250 Vac
Ethernet port	N° 1 10/100 Mbps (RJ45)
Serial ports	N° 1 RS485 ModBUS Master, programmable baud rate N° 1 RS485/RS232, programmable baud rate via terminals
USB interface	MicroUSB
Pentaband modem	GSM / GPRS / EDGE / WCDMA / HSDPA / HSUPA / HSPA+ / DC-HSPA
GPS receiver	8th generation: 16 GPS channels 14 GLONASS channels Accuracy <1,5 m CEP-50
Supported protocols	Ftp client, Smtp, http, ModBUS TCP, ModBUS RTU
Programming software	SEAL
Backup battery	Yes (battery lasts about 60 minutes)
On/off button	Yes
Comands and vocal Allarms	Yes
CPU	K64 120 MHz
RAM	256 kB
Flash (program storage)	1 MB
Flash (serial storage)	8 MB
Micro SD slot	Push-pull slot. SD supported up to 32 GB
Micro SD card	Supplied
Datalogging	Masures, alarms, logging on MicroSD card or Flash memory
Libraries and features	2G/3G HSPA+ Data exchange, alarm management, commands, events Variable log management and real-time ModBUS/Ethernet, I/O's, thresholds, controls and bit operations Firmware and remote configuration via ftp and web server Supported via modem ModBUS TCP-IP functions, ftp and web server
Additional features	Mathematical functions, filters of ModBUS alarms, post/get http via modem and PPP
Certification	CE
Norms	EN 301511, EN 301489-1/7, EN 60950