TECHNICAL DATA

Battery power supply Lithium Polymer (LiPo) battery 3.400 mAh
Lifetime Lifetime 8 hours (min@max load), 20 hours (max)
AC Power supply 230 Vac with standard USB battery charger
Status LEDs power supply
communication
error
pairing BT
datalogger on (TBD)
battery status
Insulation Battery powered instrument, intrinsically isolated
Overvoltage protection 230 Vac max without permanent damages (TBC)
Rejection 50/60 Hz
Sampling rate 10 Hz
Operating modes Signal measurement
Signal generation (with ramps)
Datalogging
Buzzer for overload reporting and inability to simulate the requested value
Standard bushings Nr. 4 test leads 4mm
Thermocouple connection Mini plug (7,9 mm) for TC signal measurement or generation
MicroUSB functions power supply
FW upgrade
ModBUS communication (virtual COM)
Wireless communication Bluetooth Low Energy 4.1 for iOS or Android device connection
Mobile app MSC by SENECA. Language available: ITA, ENG, DEU, FRA, ESP
Operating temperature -20..50°C  (without charging), 0-45°C during charge
Error display Overvoltage (V > 28 V)
Under voltage (V < -0,2 V)
Over current (I > 24 mA)
Under current (I < -0,1 mA)
Resistance < 18 Ohm
Resistance > 400 Ohm
Load cell fail supply
Blink value (voltage/current/resistance/bridge generation failure)
Humidity  30..90 % non condensing
Dimension (WxHxD) 88 x 147 x 25 mm
Weight 330 g
Protection degree IP20
Equipment Connection cables (4), microUSB/USB cable, battery charger
Calibration certificate On demand
Standard CE
Norms EN61326-1; EN61010-1
SIGNAL MEASUREMENT  
Current 0..24 mA active & passive; protection ± 28 V 
Voltage (V) 0,0÷27 V
Voltage -10mV÷+90mV
Thermocouple Type J,K ,T, E, N, R, S, B, L
Thermoresistors (2,3,4 wires) Pt100, Pt500, Pt1000, Cu50, Cu100, Ni100, Ni120
Load cell 350 Ohm; -0,2÷+2,4mV/V
Pulse max count 1.000 Hz
Frequency signal 0,1..1.000 Hz
Accuracy 0,03%; 0,04% for current
Resolution 1 µA; 1 mV; 5 µV;  0,1°C; 0,1uV/V 
SIGNAL GENERATION  
Current 0,1..24 mA active & passive; protection ± 28 V 
Voltage (V) 0,1÷24 V
Voltage (mV) -10mV÷+90mV
Thermocouple Tipo J,K ,T, E, N, R,S, B, L
Thermoresistors (2 wires) Pt100, Pt500, Pt1000, Cu50, Cu100, Ni100, Ni120
Load cell 350 Ohm; -0,2..+2,4mV/V
Pulse min 0,5 ms (1..24V) pulses number settable
Frequency signal 0,1..1.000 Hz
Accuracy 0,03%; 0,04% for current
Resolution 1 µA; 1 mV; 5µV;  0,1°C; 0,02 Ohm;  0,1 uV/V;
RAMP FUNCTIONS  
Signals Current/Voltage/TC/RTD/Load cell
Functions single or in Loop
Type MAX 9 segments, ramp resolution 100 ms, minimum ramp 1 second
DATALOGGING  
Datalogger Yes
Sampling rate >500 ms

Manuals, flyers

 
IT EN
Datasheet
pdf icon it pdf icon en
User Manual
pdf icon it pdf icon en

Tools

 
Multi
LabVIEW driver
zip icon Multi

Firmwares

 
Multi IT EN
Firmware MSC SW01050-1.0.0.40
zip icon Multi txt icon it txt icon en
Firmware MSC SW01050-1.0.0.39
zip icon Multi - -

Certifications

 
Multi IT EN
FAC-SIMILE Device calibration certificate
pdf icon Multi - -
CE Declaration of Conformity
pdf icon Multi - -
Origin Declaration
pdf icon Multi - -
REACH and ROHS declarations
- pdf icon it pdf icon en